|
|
| |
|
|
|
 |
|
05/12/2006
CERATIZIT inaugurates Tooling Academy
Like an elegant eyrie in glass and dark red wood the new administration building of CERATIZIT sits enthroned on the craggy rocks above the Reutte-based parent company in Austria. Directly after the spacious entrance hall (...)
|
 |
|
28/11/2006
New recycling plant at CERATIZIT
How can carbide scrap be converted into reusable raw materials? This was the question CERATIZIT experts asked themselves because of CERATIZIT's objective to assure its own carbide powder need. The obvious solution (...)
|
 |
|
14/11/2006
Success together with HILTI
On 30 October it happened again: At this year’s EURO PM (powder-metallurgical conference) in Ghent, which was organised by the EPMA (European Powder Metallurgy Association), the best development (...)
|
 |
|
19/10/2006
A wind turbine supplies up to 1000 households
Wind turbines represent an important alternative energy source in Germany and on an international scale. These plants are based on a fascinating and complex engineering (...)
|
 |
|
05/10/2006
CERATIZIT develops a new milling grade
In the year 2005 CERATIZIT developed a new milling grade which is particularly well-suited for roughing and medium machining of turbine blades. This grade consists (...)
|
 |
|
15/06/2006
MaxiMill C/A 211
The milling cutters of the MaxiMill series are real classics: even in the seventies, the shoulder milling cutters were applied for difficult machining operations. No matter whether it is (...)
|
 |
|
29/06/2006
Centre of excellence
Super hard materials need to satisfy extremely high requirements. In addition to the material properties, the design of the cutting edge and the quality and precision (...)
|
 |
|
06/06/2006
MaxiLock D: the 'all inclusive' tool
At the Metav 2006 CERATIZIT will introduce a new clamping system for turning inserts. Maxilock D clamps the insert reliably against the location and contact face, insert security (...)
|
 |
|
06/06/2006
OvalFlex. The oval allrounder
The machining of aluminium wheels (aluminium rims) is one of the specialties of CERATIZIT. At the METAV, CERATIZIT will introduce a totally new and patented tooling system in (...)
|
 |
|
06/06/2006
The triple solution: CombiEdge
In the focus segment mechanical engineering CERATIZIT has a new solution for the production of bearing rings. From now on three machining operations are (...)
|
 |
|
14/03/2006
HyperCoat-P
Previously unachievable levels of heat resistance, abrasion resistance and minimal friction make HyperCoat-P coatings real problem solvers in (...)
|
 |
|
14/03/2006
Turning of cast iron. HyperCoat-C CTC 3110
The new high-performance grade HyperCoat-C CTC 3110 is based on a recently developed substrate which combines the necessary toughness and heat resistance thanks to its (...)
|
 |
|
14/03/2006
CERATIZIT HyperCoat-C CTC 1130
CERATIZIT extends their cutting material range for turning applications with a new grade: HyperCoat-C CTC1130. This grade is positioned between (...)
|
|
|
|
Specials
